- 28 -
minutes, then turn it off.
Measure the oil volume of engine again to make sure it
does not leak.
Change gear oil(Fig 25)
We suggest oil octane number:
SAE 80W/90(you can use antifreezing oil in very cold area)
Oil capacity
Resolving capacity: 0.10L
Changing capacity: 0.09L
Place the vehicle by the main stand.
Screw out the immersion bolt 1 and oil-drain bolt 2.
NOTICE:When draining the oil, the engine needs a certain temperature,
use the main stand to support the motor, make sure all the oil is drained.
Clean the drain bolt and then re-install it.
Inject oil into the hole of the immersion bolt slowly till the oil spill over.
Fix the immersion bolt and screw it tight.
Comments to this Manuals